EV/VS and EV/VD flame arrester units provide manufacturers of vacuum pumps, blowers and compressors with a cost-effective protection for their machines. The high flow velocities in the small gaps of these machines can...

The PROTEGO^® in-line valve DZ/T-F is a state-of-the-art pressure or vacuum relief valve for higher system pressures. Typically, the valve is installed in the in-breathing or outbreathing lines of tanks, ve...

The PROTEGO^® LDA-W liquid detonation flame arrester was developed for storage container filling lines that are not continuously filled with product and sometimes contain a combustible mixture. The device i...

In the development of the PROTEGO^® DR/SBW in-line Detonation flame arrester, special effort was made to ease future maintenance of the flame arresters. The PROTEGO^® flame arrester unit (5) ca...

The PROTEGO^® sampling and air bleed valve is used for flame transmission-proof venting of pipelines and equipment that transports or processes flammable liquids and for taking liquid samples. The valve inc...

PROTEGO^® air-drying device of types LA or LA/V is used when suction air must be dried for atmospheric venting of storage tanks where only little or no humidity is allowed to get into the tank or the s...

The PROTEGO^® Type PM-HF pilot-controlled diaphragm valve is a highly developed valve for pressure and vacuum relief. Primarily used as a device for outbreathing in tanks, vessels, and process engineering e...

The PROTEGO^® DA-G series is a compact in-line detonation flame arrester for installation in pipes with diameters up to 3“ and is used, for example, in industrial applications such as gas analysis lines. ...

PROTEGO^® SI/DP  Internal Safety Valves  (in-tank valves) are used as additional Shut-off Valves for double-walled containers, e.g., for storing liquefied gases, cryogenic gases, or other low...