DA-SB-PTFE

DA-SB-PTFE

In-Line Detonation Flame Arrester for stable detonations and deflagrations in a straight through design with shock absorber, bidirectional

Function and Description

The in-line detonation flame arresters type PROTEGO® DA-SB-PTFE are the latest generation of flame arresters and are distinguished by its unique resistance to adhesive and corrosive media. The use of fluoroplastics as a high-tech housing coating and as solid material for the flame arrester element is unique throughout the world.

The speed of incoming detonations is highly reduced by the effective shock absorber (1) and result in an equal pressure distribution across the FLAMEFILTER® surface. This improves the flame extinction in the narrow gaps of the original PTFE-FLAMEFILTER® (3).

The devices are symmetrical and offer bidirectional flame arresting for deflagrations and stable detonations. The arrester essentially consists of two coated housing parts (4), two coated shock absorbers and the PROTEGO® flame arrester unit (2) in the center. The PROTEGO® flame arrester unit is modular and consists of several FLAMEFILTER® discs and spacers firmly held in a FLAMEFILTER® cage. The number of FLAMEFILTER® discs and their gap size depends on the arrester‘s conditions of use.

The detonation arrester PROTEGO® DA-SB-PTFE can be used for explosion group IIA (NFPA group D). The standard design is approved at an operating temperature up to +60°C / 140°F. The maximum allowable operating pressure depends on nominal Diameter (DN) and nominal size (NG) and amounts to a Maximum of 2.4 bar / 34.8 psi absolute (for DN50 / 2” see table 3).

Type-approved in accordance with the current ATEX Directive and EN ISO 16852 as well as other international standards.

Features and Advantages

  • build up of adhesive materials is prevented by the smooth surfaces
  • aplication especially for corrosive and polymerising media
  • minimum number of FLAMEFILTER® discs due to the effective shock absorber
  • different series allow increase of FLAMEFILTER® size for given flange connection resulting in lower pressure drop across the device
  • service-friendly design
  • the modular design enables each individual FLAMEFILTER® to be replaced
  • bidirectional operation as well as any direction of flow and installation position
  • Installation of temperature sensors is possible
  • less soiling of the device lowers service, operating and life-cycle cost
  • minimum pressure loss and associated low operating and life-cycle cost

Dimensions

To select nominal width/nominal size (NG/DN) - combination, please use the flow capacity chart on the following pages

NG150 / 6"150 / 6"200 / 8"300 / 12"
DN50 / 2"80 / 3"80 / 3"100 / 4"
a287 / 11.30287 / 11.30342 / 13.46447 / 17.60
b407 / 15.75407 / 15.75497 / 19.57645 / 25.39
c400 / 15.75400 / 15.75530 / 20.87530 / 20.87
NG150 / 6"150 / 6"200 / 8"300 / 12"
DN50 / 2"80 / 3"80 / 3"100 / 4"
a287 / 11.30287 / 11.30342 / 13.46447 / 17.60
b407 / 15.75407 / 15.75497 / 19.57645 / 25.39
c400 / 15.75400 / 15.75530 / 20.87530 / 20.87

Dimensions in mm / inches

DA-SB-PTFE

Material for housing

DesignA
HousingSteel with an ECTFE coating
Shock absorberSteel with an ECTFE coating
GasketPTFE
Flame arrester unitA, B, C
DesignA
HousingSteel with an ECTFE coating
Shock absorberSteel with an ECTFE coating
GasketPTFE
Flame arrester unitA, B, C

Special materials upon request

Material combinations of flame arrester unit

DesignABC
FLAMEFILTER® cageSteel with an ECTFE coatingHastelloyStainless Steel
Spider ringsSteel with an ECTFE coatingHastelloyStainless Steel
FLAMEFILTER®*PTFE*PTFE*PTFE*
SpacerPEEK / ETFE / FEPPEEK / ETFE / FEPPEEK / ETFE / FEP
DesignABC
FLAMEFILTER® cageSteel with an ECTFE coatingHastelloyStainless Steel
Spider ringsSteel with an ECTFE coatingHastelloyStainless Steel
FLAMEFILTER®*PTFE*PTFE*PTFE*
SpacerPEEK / ETFE / FEPPEEK / ETFE / FEPPEEK / ETFE / FEP

* electrically conductiveSpecial materials upon request

DA-SB-PTFE

Selection of explosion group

MESGExpl. Gr. (IEC / CEN)Gas Group (NEC)
> 0,90 mmIIAD
MESGExpl. Gr. (IEC / CEN)Gas Group (NEC)
> 0,90 mmIIAD

Special approvals upon request

Selection of max. operating pressure

NG150 / 6"150 / 6"200 / 8"300 / 12"
DN50 / 2"80 / 3"80 / 3"100 / 4"
Pmax2,4 / 34.81,1 / 15.91,2 / 17.41,2 / 17.4
NG150 / 6"150 / 6"200 / 8"300 / 12"
DN50 / 2"80 / 3"80 / 3"100 / 4"
Pmax2,4 / 34.81,1 / 15.91,2 / 17.41,2 / 17.4

Pmax = Maximum allowable operating pressure in bar / psi absolut, higher operating pressure upon request

Specification of max. operating temperature

≤ 60°C / 140°FTmaximum allowable operating temperature in °C
-Designation
≤ 60°C / 140°FTmaximum allowable operating temperature in °C
-Designation

higher operating temperatures upon request

Flange connection type

EN 1092-1; Form B1
ASME B16.5; 150 lbs RFSF
EN 1092-1; Form B1
ASME B16.5; 150 lbs RFSF

other connections upon request

Design Types and Specifications

There are three different designs available:
Basic in-line detonation flame arrester

DA-SB-PTFE - –

In-line detonation flame arrester with integrated temperature sensor* as additional protection against short time burning of from side

DA-SB-PTFE - T

In-line detonation flame with two integrated temperature sensors* as additional protection against short time burning from both sides

DA-SB-PTFE - TB

Basic in-line detonation flame arrester

DA-SB-PTFE - –

In-line detonation flame arrester with integrated temperature sensor* as additional protection against short time burning of from side

DA-SB-PTFE - T

In-line detonation flame with two integrated temperature sensors* as additional protection against short time burning from both sides

DA-SB-PTFE - TB

Additional special flame arresters upon request
*Resistance thermometer for device group II, category (1) 2 (GII cat. (1) 2)
DA-SB-PTFE

Flow Capacity Chart

The flow capacity charts have been determined with a calibrated and TÜV certified flow capacity test rig. Volume flow V in (m³/h) and CFH refer to the standard reference conditions of air ISO 6358 (20°C, 1bar). Conversion to other densities and temperatures refer to Vol. 1: “Technical Fundamentals”.

DA-SB-PTFE
DA-SB-PTFE