V/SV

V/SV

Vacuum Relief Valve

Функция и описание

The V/SV type PROTEGO® valve is a highly developed vacuum relief valve with excellent flow performance. It is primarily used as a safety device for relieving vacuum in tanks, containers and process engineering equipment. The valve offers reliable protection against vacuum, and prevents inbreathing of air close to the set pressure.

The device will start to open as soon as the set pressure is reached and only requires 10% overpressure to full lift. Continuous investments into research and development have allowed PROTEGO® to develop a low pressure valve which has the same opening characteristic as a high pressure safety relief valve. This “full lift type” technology allows the valve to be set just 10% below the maximum allowable working pressure of the tank and still safely vent the required mass flow.

Due to our highly developed manufacturing technology the tank pressure is maintained up to set pressure, with a tightness that is far superior to the conventional standard. This feature is achieved by valve seats made of high quality stainless steel and with precisely lapped valve pallets (1) or with an air cushion seal (2) in conjunction with high quality FEP diaphragm. The valve pallets are also available with a PTFE seal to prevent the valve pallets from sticking when sticky products are used, and they enable the use of corrosive media. After the vacuum is relieved, the valve reseats and provides a tight seal again.

The optimized fluid dynamic design of the valve body and valve pallet is a result of many years of research work, which allow a stable operation of the valve pallet and optimized performance resulting in reduction of product losses.

Особые признаки и преимущества

  • ”Full lift type“ technology valve, full lift at less than 10% overpressure
  • extremely tight seal, minimal product loss, low environmental impact, reduced explosion risk
  • set pressure close to the opening pressure resulting in best possible pressure management of the system
  • high flow capacity
  • can be used in explosion hazardous areas
  • self draining
  • maintenance friendly design
  • best technology for storage tanks

Таблица параметров

To select the nominal size (DN), use the flow capacity chart on the following page

DN40 / 1½"50 / 2"80 / 3"100 / 4"150 / 6"200 / 8"250 / 10"300 / 12"
a249* / 9.8*249312358443520588588
b325* / 12.79*337400514713808925925
DN40 / 1½"50 / 2"80 / 3"100 / 4"150 / 6"200 / 8"250 / 10"300 / 12"
a249* / 9.8*249312358443520588588
b325* / 12.79*337400514713808925925

размер в мм Dimensions for vacuum relief valve with heating jacket upon request

V/SV
Detail X
Detail X

Выбор материала корпуса

Design ABC
Housing Aluminium Steel Stainless Steel
Heating jacket (V / SV-H-...) Steel Stainless Steel
Valve seat Stainless Steel Stainless Steel Stainless Steel
Sealing PTFE PTFE PTFE
CoverAluminiumSteel Stainless Steel
Design ABC
Housing Aluminium Steel Stainless Steel
Heating jacket (V / SV-H-...) Steel Stainless Steel
Valve seat Stainless Steel Stainless Steel Stainless Steel
Sealing PTFE PTFE PTFE
CoverAluminiumSteel Stainless Steel

Option: Housing with ECTFE-liningSpecial materials upon request

Material selection for vacuum valve pallet

Design ABCDEF
Pressure range [mbar]

[inch W.C.]
-2,0 up to -3,5

-0.8 up to -1.4
<-3,5 up to -14

<-1.4 up to -5.6
<-14 up to -35

<-5.6 up to -14
<-14 up to -35

<-5.6up to -14
<-35 up to -60

<-14 up to -24
<-35 up to -60

<-14 up to -24
Valve palletAluminiumStainless SteelStainless SteelStainless SteelStainless SteelStainless Steel
SealingFEPFEPMetal to MetalPTFEMetal to MetalPTFE
Design ABCDEF
Pressure range [mbar]

[inch W.C.]
-2,0 up to -3,5

-0.8 up to -1.4
<-3,5 up to -14

<-1.4 up to -5.6
<-14 up to -35

<-5.6 up to -14
<-14 up to -35

<-5.6up to -14
<-35 up to -60

<-14 up to -24
<-35 up to -60

<-14 up to -24
Valve palletAluminiumStainless SteelStainless SteelStainless SteelStainless SteelStainless Steel
SealingFEPFEPMetal to MetalPTFEMetal to MetalPTFE

Special material as well as higher vacuum upon request

V/SV
Detail X
Detail X

Вид фланцевого соединения

EN 1092-1; Form B1
ASME B16.5; 150 lbs RFSF
EN 1092-1; Form B1
ASME B16.5; 150 lbs RFSF

other types upon request

Модели и спецификация

There are two different designs:
Vacuum valve in basic design

V/SV - –

Vacuum valve with heating jacket

V/SV - H

Vacuum valve in basic design

V/SV - –

Vacuum valve with heating jacket

V/SV - H

Additional special devices available upon request

Settings

Vacuum:

-2.0 mbar -60 mbar
-0.8 inch W.C. -24 inch W.C.
Higher vacuum settings upon request.
V/SV
Detail X
Detail X

Диаграммы пропускной способности

Диаграммы пропускной способности были определены с помощью калибрированной и сертифицированной объединением технического надзора (TÜV) проточной измерительной установки. Пропускная способность V. в м³/час определена воздухом при нормальных атмосферных условиях в соответствии с ISO 6358 (20°C, 1 бар). Преобразование для различных плотностей и температур см. главу 1: Технические основы

V/SV
Detail X
Detail X
V/SV
Detail X
Detail X