19.11.2026
Blog

Pressure Vacuum Relief Valves (PVRVs): How They Work and Why They Matter

Why Breather Valves Are Used

Pressure Vacuum Relief Valves Pressure and vacuum relief valve A pressure and vacuum relief valve is a pressure equalization valve for impermissible pressure and vacuum in a closed system. are ventilation devices used on storage tanks and vessels to maintain and compensate pressure Pressure (gauge pressure) Pressure for which the value is equal to the algebraic difference between the absolute pressure and the atmospheric pressure. and vacuum Vacuum Vacuum is the pressure in an enclosed space that is lower than the ambient pressure. . They release excess pressure, admit air during vacuum conditions, and help reduce product Product Includes equipment, protective systems, devices, components and combinations of these. losses and vapor emissions by supporting pressure maintenance Maintenance Combination of all technical and administrative actions, including supervision actions, intended to maintain or restore a unit in working order. close to the maximum allowable tank pressure Tank pressure Tank pressure is the pressure within a tank. .
PROTEGO® Pressure Vacuum Relief Valves are used on closed vessels and tanks filled with liquid products where accumulated pressure must be released and vacuum must be compensated. These valves maintain and compensate pressure and vacuum during operating conditions such as loading, unloading, steam cleaning, and blanketing.
This matters because uncontrolled venting can release poisonous, odorous, or flammable vapors and may also represent product loss. 

With these Pressure Vacuum Relief Valves the tank pressure is maintained up to set pressure Set pressure Set pressure is the gauge pressure at the device inlet at which the relief device is set to start opening under service conditions. with a tightness that is far superior to the conventional standard while still allowing required breathing and relief.

How Pressure Vacuum Relief Valves Work

Spring-loaded Valve

Pressure vacuum relief valves use weight-loaded or spring Spring A spring is a spiral of wire which returns to its original shape after it is pressed or pulled. -loaded valve pallets. When excess pressure develops in the tank, the pressure pallet lifts and releases flow until the tank pressure falls below the set pressure and the valve reseats.

During vacuum conditions, atmospheric overpressure Overpressure Overpressure refers to an increase in pressure in a system or vessel above the normal operating pressure. lifts the vacuum disc and vents the tank. This compensates vacuum so the vessel Vessel Container or structural envelope in which materials are processed, treated or stored. does not implode.

Key operating definitions include set pressure, opening pressure, reseating pressure Reseating pressure Value of the inlet static pressure at which the disc re-establishes contact with the seat or at which the lift becomes zero. , overpressure, accumulation Accumulation Pressure increase over the MAWP of the vessel allowed during discharge through the pressure-relief device. , pressure loss, and back pressure Back pressure The back pressure is the sum of built-up back pressure and superimposed back pressure. . Set pressure is the pressure at which the valve starts to open, while opening pressure is set pressure plus overpressure. Reseating pressure is the closing pressure at which the valve recloses and seals.

Main Types of Pressure Vacuum Relief Valves

PROTEGO® full- lift Lift Lift is the actual travel of the valve pallet from the main valve out of the closed position. pallet valves release flow within 10% overpressure from set pressure to a fully opened valve position. Conventional pallet valves release flow within a 40% pressure range. 
Diaphragm Diaphragm A diaphragm is a thin layer of material, which has a large surface area. valves use a liquid-loaded diaphragm above the valve seat Valve seat The valve seat is a component on which the valve pallet rests when the valve is closed. . The static liquid column indicates the set pressure, and the flexible diaphragm adjusts tightly to the metal valve seat. These valves are used in weather-related low temperatures and for sticky or polymerizing substances and are frost-proof down to -40°C (-40°F).
The self-controlled PROTEGO® Pilot-operated Valve Pilot-operated valve Valve controlled by a control device (pilot). releases the flow without requiring additional overpressure. Up to the set pressure until the pilot reacts, the valve remains sealed. It immediately opens to full-lift after the set pressure is reached without overpressure.

Diaphragm Valve
Pilot-operated Valve
Pressure / Vacuum Relief Pallet Valve

10 % Technology

The standard PROTEGO® valve design uses 10% technology 10% technology PROTEGO® pressure and vacuum relief valves with full-lift pallet release the flow within 10% overpressure from the set pressure to a fully opened valve (full-lift). . The advantages of 10% technology are pressure conservation close to maximum allowable tank pressure, minimization of product losses, and reduction of vapor emissions. 

This technology provides very short opening and closing pressure ranges. The vent only requires 10% overpressure above the set pressure to reach full performance. The tank pressure is maintained up to just below the maximum permissible tank pressure.

PROTEGO® 10% Technology

Where Pressure Vacuum Relief Valves Are Installed

End-of-line valves are mainly used for storage tanks, vessels, or ventilation lines. In piping systems, PROTEGO® in-line valves are used for backflow prevention, overflow valves, and occasionally as control valves.
For explosive products, in-line valves must have upstream flame arresters to protect against accelerated combustion. End-of-line valves must also be equipped with end-of-line flame arresters to protect against atmospheric deflagration Deflagration Explosion propagating at subsonic velocity. .
Pressure vacuum relief valves with integrated flame arresters perform the same pressure and vacuum relief tasks as valves without flame arresters. They maintain pressure for vapor conservation or pressure relief and enable tank breathing.
High velocity valves provide flame transmission protection with dynamic discharge between the valve cone and valve seat, starting at a set pressure of +60 mbar. High velocity valves are endurance-burning-proof and are used for flame-transmission-proof pressure and vacuum relief of tank ships.

Sizing and Operating Conditions

Valve sizing must consider maximum volumetric flow, maximum allowable pressures, and operating data. Outdoor tanks are affected by heating and cooling, and venting requirements must also account for filling, emptying, and blanketing gas systems.
The valve is optimally sized when the operating point lies on the performance curve where maximum flow is released with the valve completely open and without additional overpressure. If the design flow is not reached, the valve may not open completely, the pallet may lift briefly, and pressure may fall below set pressure before the valve reseats.

Industry Applications Mentioned

Storage Tanks
Chemical Processing Plants
Ships and Vessels
OEM Equipment

FAQs: Pressure Vacuum 
Relief Valves

A pressure vacuum relief valve Pressure/vacuum relief valve Pressure/vacuum relief valve is an umbrella term that includes pressure or vacuum relief valve as well as pressure and vacuum relief valve. maintains and compensates pressure and vacuum in tanks and vessels by releasing excess pressure and admitting air during vacuum conditions.

It releases accumulated pressure before the maximum allowable tank pressure is exceeded and compensates vacuum so the vessel does not implode.

Full-lift pallet valves release flow within 10% overpressure, while conventional pallet valves release flow within a 40% pressure range.

Pressure vacuum relief valves are installed on storage tanks, vessels, vent lines, and piping systems.

These devices are used when protection is required against atmospheric deflagration, accelerated combustion, short-time burning, or endurance burning Endurance burning Stabilized burning for an unlimited time. .

Sizing considers maximum volumetric flow, maximum allowable pressures, operating data, and the required function of the valve as pressure relief, vacuum relief, or combined pressure and vacuum relief.