Skip to main content
 logo

Recherche

144 résultats:
31. DZ/E
DZ/E

The PROTEGO® in-line valve DZ/E is a state-of-the-art pressure or vacuum relief valve with a right angle design. Typically, the valve is installed in the in-breathing or out-breathing lines of tanks, vesse...

32. BE/HK-E-IIB
BE/HK-E-IIB
The PROTEGO® BE/HK-E end-of-line deflagration flame arrester was specifically developed for vessels which are not pressurized and store Ethanol or other alcohols. The combustion of alcohol requires a modified...
33. ZE/TK
ZE/TK

The PROTEGO® ZE/TK condensate drain valve is used for flame transmission-proof condensate drainage of devices or plant equipment (e.g., tanks, pipelines, etc.) where flammable liquids can form condensate a...

34. VD/SV
VD/SV

The VD/SV type PROTEGO® valve is a highly developed pressure and vacuum relief valve with excellent flow performance. Typically, the valve is installed in the in-breathing and out-breathing lines of tanks,...

35. DR/EU
DR/EU

The PROTEGO® DR/EU series of in-line detonation flame arresters represents further development of PROTEGO® flame arrester series DR/ES, which has been successfully used in industry for decades....

36. P/EBR-E-IIB1
P/EBR-E-IIB1

The deflagration-proof and endurance burning-proof P/EBR-E type PROTEGO® valve is a highly developed pressure relief valve for large flows with an integrated flame arrester unit that is specifically design...

37. EH/0S
EH/0S

The PROTEGO® EH/0S vent cap allows vessels which are not pressurized to vent. This device prevents rain and dirt entering the vent line. The PROTEGO® EH/0S vent cap is not flame transmission pr...

38. DZ/E-F
DZ/E-F

The PROTEGO® in-line valve DZ/E-F is a state-of-the-art pressure or vacuum relief valve in a right angle design for higher system pressures. Typically, the valve is installed in the in-breathing or out-bre...

39. R/KSM
R/KSM

The PROTEGO® in-line valve R/KSM is a state-of-the-art pressure or vacuum relief valve in a right angle design made out of high-grade synthetic material. Typically, the valve is installed in the in-breathi...

40. P/EBR-E-IIB3
P/EBR-E-IIB3

The deflagration-proof and endurance burning-proof P/EBR-E type PROTEGO® valve is a highly developed pressure relief valve for large flows with an integrated flame arrester unit that is specifically design...

Search results 31 until 40 of 144