Recherche de Produits et Solutions de Sécurité

21. Construction navale, plateformes offshores et systèmes de chargement

PROTEGO® Solutions de sécurité PROTEGO® offre des solutions optimales pour la protection explosion et la sécurité des navires, plates-formes offshore et systèmes de chargement. Avec nos arrête-flammes et nos soupapes PROTEGO®, nous répondons aux exigences

22. EV/VS, EV/VD

EV/VS and EV/VD flame arrester units provide manufacturers of vacuum pumps, blowers and compressors with a cost-effective protection for their machines. The high flow velocities in the small gaps of these machines can...

23. DZ/T

The PROTEGO® in-line valve DZ/T is a state-of-the-art pressure or vacuum relief valve. Typically, the valve is installed in the in-breathing or out-breathing lines of tanks, vessels, and process equipment ...

24. DZ/EA-F

The lined PROTEGO® in-line valve DZ/EA-F is a state-of-the-art pressure or vacuum relief valve in a right angle design for higher set pressures. The lining makes this model a perfect solution for corrosive...

25. UB/SF

The PROTEGO® UB/SF diaphragm valve is the only deflagration-proof and endurance burning-proof valve of its kind in the world. It is a highly developed combined pressure and vacuum valve with dynamic and stat...

26. BR/TS-80-IIB3

The PROTEGO® BR/TS-80-IIB3 detonation flame arrester was developed for protecting tankships but can also be used for containers. These devices are especially used on tank ships operating on inland waterway...

27. Soupapes

La Technologie 10% La technologie 10% "full-lift" permet d'économiser des produits (réduction possible de vos émissions fugitives de plus de 30 %). Haute performance d'étanchéité Des pertes de produits les plus faibles possibles et une réduction de la pollution

28. VD/SV-HR

The deflagration-proof and endurance burning-proof VD/SV-HR type PROTEGO® valve is a highly developed combined pressure/vacuum relief valve for high flow capacities with an integrated flame arrester. It is...

29. DA-SB

The in-line detonation flame arresters type PROTEGO® DA-SB are the newest generation of flame arresters. Based on flow and explosion dynamic calculations as well as decades of field tests, a product line w...

30. LH/AD

The PROTEGO® LH/AD end-of-line deflagration flame arrester provides protection against flame transmission through atmospheric deflagration. The device is typically installed on vent lines of vessels and pl...