Recherche de Produits et Solutions de Sécurité

11. Techniques de récupération des gaz dans les décharges, de biogaz et de traitement des eaux usées

Protection du réservoir collecteur resp. du digesteur par soupape de surpression/dépression UB/SF et arrête-flammes antidétonation DR/ES dans la conduite collectrice de gaz. Protection du désulfurateur par des arrête-flammes adaptés DA-E(-T). Protection du

12. Arrête-flammes

Mode de fonctionnement Le principe est celui du FLAMMENFILTER® que PROTEGO® utilise pour tous ses arrête-flammes. Plusieurs disques FLAMMENFILTER® composent avec les entretoises intermédiaries et une cage de l’élément arrête-flammes PROTEGO®. Un

13. DE-S-IIC

The deflagration proof and endurance burning proof PROTEGO® DE-S type device is a state of the art high velocity vent valve working on the principle of a dynamic flame arrester. It is primarily used as a d...

14. VN-A-PCPM

The PROTEGO® VN-A-PCPM pilot-operated diaphragm valve is a highly developed valve for pressure and vacuum relief. It is primarily used as a safety device for out-breathing in tanks, containers, and proc...

15. P/EB-E

The deflagration-proof and endurance burning-proof P/EB-E type PROTEGO® valve is a highly developed pressure relief valve for large flows with an integrated flame arrester unit that is specifically designe...

16. PM-HF

The PROTEGO® Type PM-HF pilot-controlled diaphragm valve is a highly developed valve for pressure and vacuum relief. Primarily used as a device for outbreathing in tanks, vessels, and process engineering e...

17. LA, LA/V

PROTEGO® air-drying device of types LA or LA/V is used when suction air must be dried for atmospheric venting of storage tanks where only little or no humidity is allowed to get into the tank or the s...

18. PV/EBR

The deflagration-proof and endurance burning-proof PV/EBR type PROTEGO® valve is a highly developed combined pressure/ vacuum relief valve for high flow capacities with an integrated flame arrester. It is ...

19. BE/HR-E-IIB3

The PROTEGO® BE/HR-E-IIB3 end-of-line deflagration flame arrester was specifically developed for vessels which are not pressurized and store Ethanol or other alcohols. The combustion of alcohol requires a ...

20. TS/P, TS/E, TS/W

The PROTEGO® type TS/… series of hydraulic flame arresters are mainly designed to protect process plants which are connected to waste thermal combustion units. Hydraulic flame arresters of the TS/… ser...