Recherche de Produits et Solutions de Sécurité

31. Soupapes

La Technologie 10% La technologie 10% "full-lift" permet d'économiser des produits (réduction possible de vos émissions fugitives de plus de 30 %). Haute performance d'étanchéité Des pertes de produits les plus faibles possibles et une réduction de la pollution

32. DZ/EA-F

The lined PROTEGO® in-line valve DZ/EA-F is a state-of-the-art pressure or vacuum relief valve in a right angle design for higher set pressures. The lining makes this model a perfect solution for corrosive...

33. BR/TS-80-IIB3

The PROTEGO® BR/TS-80-IIB3 detonation flame arrester was developed for protecting tankships but can also be used for containers. These devices are especially used on tank ships operating on inland waterway...

34. VD/SV-HR

The deflagration-proof and endurance burning-proof VD/SV-HR type PROTEGO® valve is a highly developed combined pressure/vacuum relief valve for high flow capacities with an integrated flame arrester. It is...

35. DA-SB

The in-line detonation flame arresters type PROTEGO® DA-SB are the newest generation of flame arresters. Based on flow and explosion dynamic calculations as well as decades of field tests, a product line w...

36. LH/AD

The PROTEGO® LH/AD end-of-line deflagration flame arrester provides protection against flame transmission through atmospheric deflagration. The device is typically installed on vent lines of vessels and pl...

37. ER/VH

The ER/VH type PROTEGO® valve is a highly developed emergency pressure relief valve with high flow capacity. It is primarily used as a device for emergency pressure relief for storage tanks, containers, si...

38. SA/DA

Fixed roof tanks (e.g. slop tanks) are equipped with Floating Skimmer System PROTEGO® SA/DA to discharge the liquid at the liquid surface. In this process, the inlet opening is always moved with the liquid...

39. WV/T

PROTEGO® WV/T change-over valves are mainly used together with other valves or devices (e.g., PROTEGO® flame arresters) on cryogenic storage tanks and on tanks in process plants in the chemical...

40. PU-IIB1

The deflagration proof gauging pipes with integrated flame arresters type PROTEGO® PU are used for explosion-proof gauging of tank contents. The gauging pipes of type PROTEGO® PU consist...