Skip to main content
 logo

Recherche

129 résultats:
111. SI/DP
SI/DP
PROTEGO® SI/DP  Internal Safety Valves  (in-tank valves) are used as additional Shut-off Valves for double-walled containers, e.g., for storing liquefied gases, cryogenic gases, or other low...
112. PM-HF
PM-HF
The PROTEGO® Type PM-HF pilot-controlled diaphragm valve is a highly developed valve for pressure and vacuum relief. Primarily used as a device for outbreathing in tanks, vessels, and process engineering e...
113. DA-G
DA-G
The PROTEGO® DA-G series is a compact in-line detonation flame arrester for installation in pipes with diameters up to 3“ and is used, for example, in industrial applications such as gas analysis lines. ...
114. LA, LA/V
LA, LA/V
PROTEGO® air-drying device of types LA or LA/V is used when suction air must be dried for atmospheric venting of storage tanks where only little or no humidity is allowed to get into the tank or the s...
115. DR/SBW
DR/SBW
In the development of the PROTEGO® DR/SBW in-line Detonation flame arrester, special effort was made to ease future maintenance of the flame arresters. The PROTEGO® flame arrester unit (5) ca...
116. DZ/T-F
DZ/T-F
The PROTEGO® in-line valve DZ/T-F is a state-of-the-art pressure or vacuum relief valve for higher system pressures. Typically, the valve is installed in the in-breathing or outbreathing lines of tanks, ve...
117. DV/ZU
DV/ZU
The PROTEGO® in-line valve DV/ZU is a state-of-the-art pressure and vacuum relief valve with separate flange connections for pressure and vacuum breathing. Typically, the valve is installed in the in-breat...
118. FA-I-PTFE
FA-I-PTFE
The in-line deflagration flame arresters type PROTEGO® FA-I-PTFE are the latest generation of flame arresters and are distinguished by their unique resistance to adhesive and corrosive media. The use of fl...
119. PV/EBR-E-IIB3
PV/EBR-E-IIB3
The deflagration-proof and endurance burning-proof PV/EBR-E type PROTEGO® valve is a highly developed combined pressure/ vacuum relief valve for high fl ow capacities with an integrated flame arrester that...
120. LH/EB
LH/EB
The PROTEGO® LH/EB end-of-line deflagration flame arrester is used to protect process engineering apparatus and vessels which are not pressurized and process Methane/Air mixtures. The device provides prote...
Search results 111 until 120 of 129