Emergency pressure relief valve
- “full lift type” technology valve utilizes only 10% overpressure to reach full lift
- excellent tightness and hence least possible product losses and reduced environmental pollution
- the set pressure is close to the opening pressure which results in best possible pressure management of the system
- high flow capacity
- the valve pallet is guided within the housing to protect against harsh weather conditions
- can be used in areas subject to explosion hazards
- reinforced design
- safely secured housing cover
- best technology for API-tanks
Función y Descripción
The ER/V type PROTEGO® valve is a highly developed emergency pressure relief valve with high flow capacity. It is primarily used as a device for emergency pressure relief for storage tanks, containers, silos, and process engineering equipment; it offers reliable protection against overpressure and prevents impermissible product vapor loss close to the set pressure. It is designed to relief particularly large amounts to prevent the vessel from rupturing in an emergency case.
The device will start to open as soon as the set pressure is reached and only requires 10% overpressure to full lift. Continuous investments into research and development have allowed PROTEGO® to develop a low pressure valve which has the same opening characteristic as a high pressure safety relief valve. This “full lift type” technology allows the valve to be set just 10% below the maximum allowable working pressure of the tank and still safely vent the required mass flow.
Due to the highly developed manufacturing technology, the tank pressure is maintained up to the set pressure, with a tightness that is far superior to the conventional standard. This feature is achieved by valve seats made of stainless steel with an inserted O-ring seal, a precisely lapped valve pallet, as well as a reinforced housing design. After the excess pressure is relieved, the valve reseats and provides a tight seal again.
To select the nominal size (DN), use the flow capacity chart on the following page
|DN||200 / 8"||250 / 10"||300 / 12"||350 / 14"||400 / 16"||450 / 18"||500 / 20"||600 / 24"||700 / 28"|
|a||305 / 12.01||375 / 14.76||425 / 16.73||445 / 17.52||495 / 19.49||545 / 21.46||615 / 24.21||715 / 28.15||795 / 31.30|
|b||depending on pressure setting|
Selección de materiales
|Housing||Steel||Steel||Stainless Steel||Stainless Steel|
|Valve seat||Stainless Steel||Stainless Steel||Stainless Steel||Stainless Steel|
|Valve pallet||Aluminium*||Steel-Stainless Steel*||Aluminium*||Stainless Steel*|
Tipo de bridas de conexión
|EN 1092-1; Form B1|
|ASME B16.5 CL 150 R.F.|
Modelo y especificación
The valve pallet is weight-loaded. Higher pressures are achieved with levers (see ER/VH) or with spring-loading (see ER/V-F).
Pressure valve in basic design
Additional special devices available upon request.
|DN 200 to DN 350||+5 mbar||+40 mbar|
|+2 inch W.C.J||+16 inch W.C.|
|DN 400 to DN 700||+5 mbar||+25 mbar|
|+2 inch W.C.J||+10 inch W.C.|
Diagrama de flujo volumétrico
Los diagramas de flujo volumétrico han sido determinados con un banco de pruebas de caudal calibrado y certifi - cado por TÜV. El flujo volumétrico V. en [m³/h] y el CFH se refi eren a las condiciones estándar de referencia de aire según ISO 6358 (20°C, 1bar). La conversión a otras densidades y temperaturas están referidas en el Vol. 1: “Fundamentos Técnicos”.