The PROTEGO^® gauging and sampling assembly consists of the manual gauging and sampling device PROTEGO^® VP/HK (1), the gauging nozzle PROTEGO^® PS/E (2), the gauging pipe PROTEGO^...

The PROTEGO^® E/H0 vent cap allows vessels which are not pressurized to vent. This device prevents rain and dirt from entering the vent line. The EH/0 vent cap is not flame transmission proof. It is often u...

PROTEGO^® NB/AP in-tank valves are used in storage tanks for cryogenic liquids in order to seal off discharge lines in the event of an accident or emergency (pipe bursting). These devices meet the requireme...

PROTEGO^® SI/DP in-tank valves are used as additional internal shut-off valve for double-walled containers, e.g., for storing liquefied gases, cryogenic gases, or other low temperature products or chemicals...

The PROTEGO^® DR/ES-PTFE series in-line detonation flame arrester is distinguished by its unique resistance to adhesive and corrosive media. The use of fluoroplastics as a high-tech housing coating and as ...

The PROTEGO^® FA-E series of in-line deflagration flame arresters is designed with an eccentric housing to automatically drain condensate build up in the housing. Due to its eccentric design, the device can...

The PROTEGO^® BE/HR-E end-of-line deflagration flame arrester was specifically developed for vessels which are not pressurized and store Ethanol or other alcohols with a MESG ≥ 0,85 mm. The combustion of ...

The PROTEGO® BE/HK-E end-of-line deflagration flame arrester was specifically developed for vessels which are not pressurized and store ethanol or other alcohols. The combustion of alcohol requires a modified flame a...

Universal Floating Suction Units FSU are designed to ensure that product in a storage tank is drawn off just below the surface of the liquid where it is cleanest, preventing the suction point being at the bottom of th...

The PROTEGO^® in-line valve DV/ZU is a state-of-the-art pressure and vacuum relief valve with separate flange connections for pressure and vacuum breathing. Typically, the valve is installed in the in-breat...