PU-IIA

PU-IIA

Gauging Pipe

deflagration proof

Function and Description

The deflagration proof gauging pipes with integrated flame arresters type PROTEGO® PU are used for explosion-proof gauging of tank contents.

The gauging pipes of type PROTEGO® PU consist of insert pipe (1) with flame arrester (2) - equipped with FLAMEFILTER® (3) _ connecting pipe (4), bushing (5) to be welded in the nozzle cover and cap (6). The number of flame arretsres depends on the length of the gauging pipe. Please note the Maximum Dimension of 1.2 m / 3.94 ft for measure b and 4.1 m / 13.45 ft for measure c.

In normal Operation the gauging pipe is closed with the cap. It is opened only for tank content gauging.

Type PROTEGO® PU ensures flame transmission protection against atmospheric deflagrations or in-line deflagrations of gas/air mixtures or product vapour/air mixtures of substances from explosion group IIA (MESG > 0.9 mm, NEC Group D) in all ranges of flammable concentrations up to a Service temperature of +60°C / 140°F.

This device is type approved and tested according to the European Standard EN 12874 - Flame Arresters - as a protective System according to ATEX Directive - equipment intended for use in potentially explosiv atmospheres. EC-Type Examination Certificates issued by a European notified Body are available. Examination certificates from other approval authorities are available on request.

Dimensions

The measures a, b, y must be given with the order

DN minimum size d
25 / 1"150 / 5.91
32 / 1¼"150 / 5.91
40 / 1½"200 / 7.87
50 / 2"200 / 7.87
DN minimum size d
25 / 1"150 / 5.91
32 / 1¼"150 / 5.91
40 / 1½"200 / 7.87
50 / 2"200 / 7.87

Dimensions in mm / inches

PU-IIA

DN 40 / 1½" and 50 / 2"

Material selection

DesignAB
Gauging pipeSteelStainless Steel
Weld-in bushingSteelStainless Steel
CapBrassStainless Steel
FLAMENFILTER® cageSteelStainless Steel
FLAMENFILTER®Stainless SteelStainless Steel
DesignAB
Gauging pipeSteelStainless Steel
Weld-in bushingSteelStainless Steel
CapBrassStainless Steel
FLAMENFILTER® cageSteelStainless Steel
FLAMENFILTER®Stainless SteelStainless Steel

In design A the connecting pipe is equipped with reducing piece and blind cap - each with integrated sealing and chain. In design B the connecting pipe is closed with a hexagon cap connected to the retainer ring via chain and wire hoop.

PU-IIA

DN 40 / 1½" and 50 / 2"

Data Necessary for Specification

Storage product
Tank Diameter (m or ft)
Tank nozzle height (m or ft)
Length a (m or ft)
Length b (m or ft), max 1.2 m / 3.94 ft
Please note the Maximum length of 4.1 m / 13.45 ft for measure c
Gauging pipe Diameter DN (mm or inches)

Selection and Design

Select the required nominal sizes based on the gauging Equipment size or nominal sizes of the connecting nozzle. Specify measures a, b and y for the Definition of the quantity of integrated flame arretsres.

Explosion group

MESGExpl. Gr. (IEC / CEN)Gas Group (NEC)
> 0,90 mmIIAD
MESGExpl. Gr. (IEC / CEN)Gas Group (NEC)
> 0,90 mmIIAD

Special approvals upon request

PU-IIA

DN 40 / 1½" and 50 / 2"

PU-IIA

DN 40 / 1½" and 50 / 2"

The gauging pipes of type PROTEGO® PU mainly serve for tank gauging in horizontal tanks using fuel dip stick or manual gauging device e.g. of type PROTEGO® H/P.


PU-IIA

DN 40 / 1½" and 50 / 2"