International Standard for Flame Arresters – ISO 16852
As of January 1st, 2011 the EN 12784 was superseded by EN ISO 16852 as a harmonised standard under the Directive 94/9/EC. The ISO Standard ISO 16852 was adopted as a European Standard EN ISO 16852:2010 „Flame arresters – Performance requirements, test methods and limits for use“. It thus supersedes EN 12874 having an identical title. This Standard was not superseded for safety engineering reasons. The new standard was adopted to extend the standard's scope beyond Europe. Flame arresters which conform to EN 12874, hence, continue satisfying the basic safety and health requirements set forth in the Directive 94/9/EC. Work is already in hand to revise the ISO Standard; another update has become necessary to cover in particular the testing of high-velocity vent valves.
Standards for venting atmospheric and low-pressure storage tanks - ISO 28300 and API 2000
The international standard ISO 28300 and the standard API 2000, Sixth Edition are identical contentwise and cover the normal venting as well as the normal and emergency vapour venting requirements for aboveground liquid petroleum or petroleum products storage tanks and underground refrigerated storage tanks, designed for operation at pressures from full vacuum through 1.034 barg (15 psig). Discussed in this Standard entitled “Petroleum, petrochemical and natural gas industries - Venting atmospheric and low-pressure storage tanks“, are the causes of overpressure and vacuum; determination of venting requirements; means of venting; selection, and installation of venting devices; and testing and marking of relief devices. This Standard is intended for tanks containing petroleum and petroleum products but is can also be applied to tanks containing other liquids.
Safety Design Principles Standards Committee (NASG)
Being a multi-subject committee, the NASG is in charge of standardisation work with regard to testing and use of explosion protection devices (except flame arresters). The Directive 94/9/EC is applicable to equipment and protective systems intended for use in potentially explosive atmospheres (ATEX). This Directive defines basic safety and health requirements that need to be satisfied by manufacturers of such equipment and systems. The NASG takes an active part in formulating standards which put in concrete terms and detail the basic requirements set forth in the Directive. Standardisation covers explosion suppression systems or protection systems for pressure relief, and many more subjects.
The PROTEGO® Team has an active share in these standardisation bodies:
NA 095-02-01 AA Explosionsschutzeinrichtungen (außer Flammendurchschlagsicherungen) NA 104-02-05 AA Flammendurchschlagsicherungen und Tanklüftungseinrichtungen NA 132-02-06 AA Schiffsarmaturen NA 104-01-07 AA Tanks aus metallenen Werkstoffen
BSI - EXL/023 Explosion Protection & Fire Precautions in Industrial & Chemical Plant BSI - EXL/023/01 Flame Arresters – Chair of Flame Arrester Panel
CEN TC 305 WG 6 Flame Arresters CEN TC 265 WG 9 Metallic tanks for the storage of liquids
API API Committee on pressure relieving systems NFPA NFPA Technical Committee on Explosion Protection Systems
SAC TC208 WG9 Fire and Explosion Protection GB/T20801.6 – 2006 Pressure piping code – Industrial piping – Part 6, Safeguarding Standard Handbook for industrial valves Volume 6: Breather Valves Sinopec Safety Guideline for Tank Farm VOCs Collection and Treatment Safety Standard for Vapor Collection of Tank Farm of Petro- and Chemical industry Sinopec Safety Guideline for Tank Farm VOCs Collection and Treatment
ISO TC 21 WG3 Flame Arresters ISO TC 8 SC3 Ships and marine technology ISO TC 67 SC6 WG12 Pressure-relieving and depressuring systems IEC SC 31 M AHG 3 Protective Systems