DR/ES-PTFE

DR/ES-PTFE

In-Line Detonation Flame Arrester for stable detonations and deflagrations in right angle design with shock absorber, unidirectional

Функция и описание

The PROTEGO® DR/ES-PTFE series in-line detonation flame arrester is distinguished by ist unique resistance to adhesive and corrosive media. The use of fluoroplastics as a high-tech housing coating and as safety flame arrester element is unique throughout the world. The device represents a further development of PROTEGO® flame arresters DR/ES in a right angle design that have been used and proven for decades in industry. The device protects against deflagrations and stable detonations.

Once a detonation enters the flame arrester, energy is absorbed from the detonation shock wave by the integrated shock Absorber (1) before the flame is extinguished in the narrow channel of the PTFE FLAMEFILTER® (3).

The PROTEGO® flame arrester unit (2) consists of several FLAMEFILTER® discs and spacers firmly held in the FLAMEFILTER® cage (4). The gap size and number of FLAMEFILTER® discs are determined by the operating data parameters of the mixture flowing in the line (pressure, temperature). The detonation arrester can be used for Explosion group IIA (NEC group D). The standard design is approved at an operating temperature up to +60°C / 140°F and an absolute operating pressure acc. to table 3.

Type-approved in accordance with the current ATEX Directive and EN ISO 16852 as well as other international standards.

Особые признаки и преимущества

  • build up of adhesive materials is prevented by the smooth surfaces
  • minimum number of FLAMEFILTER® discs due to the effective shock absorber
  • quick removal and installation of the complete PROTEGO® flame arrester unit and the individual FLAMEFILTER® discs in the cage
  • the modular design enables each individual FLAMEFILTER® discs to be replaced
  • offers protection against deflagrations and stable detonations
  • the right angle design saves pipe elbows
  • ideal for corrosive media
  • less soiling of the device lowers service, operating and life-cycle cost

Таблица параметров

To select the nominal size (DN), please use the flow capacity charts on the following pages

DN40 / 1½"50 / 2"65 / 2½"80 / 3"100 / 4"125 / 5"150 / 6"
a153 / 6.02155 / 6.10198 / 7.80200 / 7.87250 / 9.84332 / 13.07335 / 13.19
b183 / 7.20185 / 7.28223 / 8.78225 / 8.86290 / 11.42357 / 14.06360 / 14.17
c335 / 13.19335 / 13.19420 / 16.53420 / 16.53490 / 19.29590 / 23.23590 / 23.23
c1455 / 17.91455 / 17.91585 / 23.03585 / 23.03680 / 26.77835 / 32.87835 / 32.87
d210 / 8.27210 / 8.27275 / 10.83275 / 10.83325 / 12.80460 / 18.11460 / 18.11
e685 / 26.97685 / 26.97770 / 30.31770 / 30.31840 / 33.07940 / 37.01940 / 37.01
DN40 / 1½"50 / 2"65 / 2½"80 / 3"100 / 4"125 / 5"150 / 6"
a153 / 6.02155 / 6.10198 / 7.80200 / 7.87250 / 9.84332 / 13.07335 / 13.19
b183 / 7.20185 / 7.28223 / 8.78225 / 8.86290 / 11.42357 / 14.06360 / 14.17
c335 / 13.19335 / 13.19420 / 16.53420 / 16.53490 / 19.29590 / 23.23590 / 23.23
c1455 / 17.91455 / 17.91585 / 23.03585 / 23.03680 / 26.77835 / 32.87835 / 32.87
d210 / 8.27210 / 8.27275 / 10.83275 / 10.83325 / 12.80460 / 18.11460 / 18.11
e685 / 26.97685 / 26.97770 / 30.31770 / 30.31840 / 33.07940 / 37.01940 / 37.01

размер в мм

DR/ES-PTFE

Выбор материала корпуса

Design A
HousingSteel with an ECTFE coating
Cover with shock absorberSteel with an ECTFE coating
GasketPTFE
Flame arrester unitA, B, C
Design A
HousingSteel with an ECTFE coating
Cover with shock absorberSteel with an ECTFE coating
GasketPTFE
Flame arrester unitA, B, C

Special materials upon request

Комбинация материалов элемента огнепреградителя

Design ABC
FLAMEFILTER® cagePTFE*HastelloyStainless Steel
FLAMEFILTER®*PTFE*PTFE*PTFE*
SpacerPEEK / ETFE / FEPPEEK / ETFE / FEPPEEK / ETFE / FEP
Design ABC
FLAMEFILTER® cagePTFE*HastelloyStainless Steel
FLAMEFILTER®*PTFE*PTFE*PTFE*
SpacerPEEK / ETFE / FEPPEEK / ETFE / FEPPEEK / ETFE / FEP

*electrically conductive

DR/ES-PTFE

Выбор группы взрывоопасности

MESGExpl. Gr. (IEC / CEN)Gas Group (NEC)
> 0,90 mmIIAD
MESGExpl. Gr. (IEC / CEN)Gas Group (NEC)
> 0,90 mmIIAD

Special approvals upon request

Выбор максимального рабочего давления P

DN40 / 1 ½"50 / 2"65 / 2 ½"80 / 3"100 / 4"125 / 5"150 / 6"
Expl. Gr.IIAPmax1.1 / 15.91.1 / 15.91.2 / 17.41.2 / 17.41.1 / 15.91.1 / 15.91.1 / 15.9
DN40 / 1 ½"50 / 2"65 / 2 ½"80 / 3"100 / 4"125 / 5"150 / 6"
Expl. Gr.IIAPmax1.1 / 15.91.1 / 15.91.2 / 17.41.2 / 17.41.1 / 15.91.1 / 15.91.1 / 15.9

Pmax = Maximum allowable operating pressure in bar / psi absolut, higher operating pressure upon request

Спецификация макс. рабочей температуры

≤ 60°C / 140°FTmaximum allowable operating temperature in °C
-Designation
≤ 60°C / 140°FTmaximum allowable operating temperature in °C
-Designation

higher operating temperatures upon request

Вид фланцевого соединения

EN 1092-1; Form B1
ASME B16.5; 150 lbs RFSF
EN 1092-1; Form B1
ASME B16.5; 150 lbs RFSF

other connections upon request

Модели и спецификация

There are two different designs available:
Basic in-line detonation flame arrester

DR/ES - PTFE –

In-line detonation flame arrester with integrated temperature sensor* as additional protection against short time burning

DR/ES - PTFE - T

Basic in-line detonation flame arrester

DR/ES - PTFE –

In-line detonation flame arrester with integrated temperature sensor* as additional protection against short time burning

DR/ES - PTFE - T

*Resistance thermometer for device group II, category (1) 2 (GII cat. (1) 2)
DR/ES-PTFE

Диаграммы пропускной способности

Диаграммы пропускной способности были определены с помощью калибрированной и сертифицированной объединением технического надзора (TÜV) проточной измерительной установки. Пропускная способность V. в м³/час определена воздухом при нормальных атмосферных условиях в соответствии с ISO 6358 (20°C, 1 бар). Преобразование для различных плотностей и температур см. главу 1: Технические основы

DR/ES-PTFE
DR/ES-PTFE