BR/TS-80-IIB3

BR/TS-80-IIB3

Detonation Flame Arrester for tank ships and containers

Функция и описание

The PROTEGO® BR/TS-80-IIB3 detonation flame arrester was developed for protecting tankships but can also be used for containers. These devices are especially used on tank ships operating on inland waterways or coastal shipping. The device is installed on the tank or a pipe section connected to the tank with a nominal size of 250 mm / 10" and connected to the vapour balancing line (DN 80 / 3"). The individual tanks connected via the vapour balancing line are technically decoupled by the Detonation arresters and protected.

The device protects against unidirectional detonation. In particular, the arrester consists of a shock absorber (1) and the PROTEGO® flame arrester unit (2). The PROTEGO® flame arrester unit consists of several FLAMEFILTER® discs (3) and spacers firmly held in a FLAMEFILTER® cage (4). It is moveable and can be folded to the side for maintenance. The Primary goal of this design is to enable the tank to be vented or supplied with air in an emergency when ice or crystallizing products Clog the FLAMEFILTER® . The PROTEGO® BR/TS flame arrester is available for explosion groups IIA to IIB3 (NEC group D and C MESG ≥ 0.65 mm).

The standard design is approved up to an operating temperature an operating pressure up to 1.55 bar / it meets all the conditions of the ADN* transport on European Inland Waterways.

Type-EN ISO 16852 and classification societies are available.

Особые признаки и преимущества

  • meets all ADN* requirements
  • flat design
  • the emergency venting with the flexibly mounted flame arrester enables use even in bad weather conditions as well as with contaminated products
  • extraordinarily easy to service
  • the design of the PROTEGO® flame arrester unit enables individual FLAMEFILTER® discs to be replaced
  • we offer support in calculating loading and unloading rates
  • applicable for nearly all flammable liquids
  • may be used as maintenance and cleaning hatch
  • cost efficient spare parts
* European Agreement concerning the International Carriage of Dangerous Goods by Inland Waterways
BR/TS-80-IIB3

Выбор материала корпуса

DesignAB
HousingSteelStainless Steel
CoverSteelStainless Steel
GasketTankatiteTankatite
Flame arrester unitAA
DesignAB
HousingSteelStainless Steel
CoverSteelStainless Steel
GasketTankatiteTankatite
Flame arrester unitAA

Material selection for flame arrester unit

Design A
FLAMEFILTER® cageStainless Steel
FLAMEFILTER®Stainless Steel
SpacerStainless Steel
Design A
FLAMEFILTER® cageStainless Steel
FLAMEFILTER®Stainless Steel
SpacerStainless Steel

BR/TS-80-IIB3

Вид фланцевого соединения

EN 1092-1; Form B1
ASME B16.5; 150 lbs RFSF
EN 1092-1; Form B1
ASME B16.5; 150 lbs RFSF

other types upon request

BR/TS-80-IIB3

Диаграммы пропускной способности

Диаграммы пропускной способности были определены с помощью калибрированной и сертифицированной объединением технического надзора (TÜV) проточной измерительной установки. Пропускная способность V. в м³/час определена воздухом при нормальных атмосферных условиях в соответствии с ISO 6358 (20°C, 1 бар). Преобразование для различных плотностей и температур см. главу 1: Технические основы

BR/TS-80-IIB3
BR/TS-80-IIB3