EB-Z

EB-Z

Deflagration Flame Arrester, endurance burning proof, End-of-Line

Function and Description

The PROTEGO® EB-Z end-of-line deflagration flame arrester has been successfully used to protect small vessels and process engineering apparatus which are not pressurized. The device provides protection against flame transmission through atmospheric deflagration and stabilized flames which can burn for very long time on the flame arrester element surface, so called endurance burning. Main application area is on in - and outbreathing vent lines, with the goal to prevent flame transmission caused by endurance burning or atmospheric deflagration from propagating into the vessel or plant.

The PROTEGO® EB-Z consists of a housing (1), a weather hood (2) and the FLAMEFILTER® (3). The weather hood is made out of acrylic glass, which will melt when impacted by flames and al-low heat to dissipate to the environment.

The PROTEGO® EB-Z serie end-of-line deflagration flame arrester is available for sub-stances of explosion group IIA (NEC group D MESG > 0.90 mm). The standard design can be used for operating temperatures up to +60°C / 140°F.

Type-approved according to ATEX Directive and EN ISO 16852 as well as other internationally accepted standards.

Features and Advantages

  • protection against atmospheric deflagration and endurance burning of pure hydrocarbons
  • weather hood protects against environmental impact (i.e. weather, bird nests, etc.)
  • modular design allows replacement of single FLAMEFILTER®
  • easy maintenance
  • modular design results in low spare part costs
  • low operating and lifecycle cost
  • cost effective protection for small vessels and process engineering apparatus

Dimensions

To select the nominal size (DN), please use the flow capacity chart

DN/ G, NPT 15 / ½“ 20 / ¾"<//th> 25 / 1“ 32 / 1¼““
a 87 87 114 114
b 93 93 98 98
b* 123 123 123 123
SW 32 32 50 50
DN/ G, NPT 15 / ½“ 20 / ¾"<//th> 25 / 1“ 32 / 1¼““
a 87 87 114 114
b 93 93 98 98
b* 123 123 123 123
SW 32 32 50 50

Dimensions in mm / inches, SW= width across flats

EB-Z

Material selection

DesignB
Housing Stainless Steel
Weather Hood Acrylic glass
FLAMEFILTER® Stainless Steel
DesignB
Housing Stainless Steel
Weather Hood Acrylic glass
FLAMEFILTER® Stainless Steel

Special materials upon reques

EB-Z

Selection of explosion group

MESGExpl. Gr. (IEC / CEN)Gas Group (NEC)
> 0,90 mm IIA D
MESGExpl. Gr. (IEC / CEN)Gas Group (NEC)
> 0,90 mm IIA D

Special approvals upon request

Type of connection

Pipe thread DIN ISO 228-1
EN 1092-1; Form B1
ASME B16.5; 150 lbs RFSF
Pipe thread DIN ISO 228-1
EN 1092-1; Form B1
ASME B16.5; 150 lbs RFSF

other types upon request

End-of-line deflagration flame arrester, basic design

EB-Z

End-of-line deflagration flame arrester, basic design

EB-Z

Special designs available on request
EB-Z

Flow Capacity Chart

The flow capacity charts have been determined with a calibrated and TÜV certified flow capacity test rig. Volume flow V in (m³/h) and CFH refer to the standard reference conditions of air ISO 6358 (20°C, 1bar). Conversion to other densities and temperatures refer to Vol. 1: “Technical Fundamentals”.

EB-Z
EB-Z