ZE/WU

ZE/WU

Sampling and Air Bleed Valve
deflagration proof

Función y Descripción

The PROTEGO® ZE/WU sampling and air bleed valve is used for flame transmission proof venting of pipelines and equipment that transports or processes flammable liquids, and for taking liquid samples. The valve incorporates an end-of-line deflagration flame arrester. Should the gas/air mixtures or product vapour/air mixtures ignite during venting, the valve prevents flash back into the system to be protected.

The sampling and air bleed valve PROTEGO® ZE/WU consists of the threaded angle valve in pressure stage PN25 (1) with hand wheel as standard design and female threaded connection (pipe thread G½“up to G1“) and the flame arrester (2) with cover (3). As an optional elbow fitting (4) is available as outlet for sampling. The flame arrester (2) consists of the flame arrester cage with FLAMEFILTER®.

The valve opens manually with the hand wheel. For sampling, a suitable container is required.

The simple and sturdy design makes it suitable for nearly all flammable liquids. This device can be installed in any position.

Flame transmission protection is guaranteed against atmospheric deflagrations of gas/air mixtures or product vapour/air mixtures of explosion groups up to IIB (NEC group D to C) up to a service temperature of +60°C / 140°F and an absolute operating pressure up to 1.1 bar / 15.9 psi.

Type-approved in accordance with the current ATEX Directive and EN ISO 16852 as well as other international standards.

ZE/WU
* position of drilling holes on flange connection as well as thickness upon request for size DN 15 / ½", DN 20 / ¾", DN 25 / 1", DN 32 / 1¼", DN 40 / 1½" and pressure nominal PN 25/40 resp. PN 100 available
ZE/WU
* position of drilling holes on flange connection as well as thickness upon request for size DN 15 / ½", DN 20 / ¾", DN 25 / 1", DN 32 / 1¼", DN 40 / 1½" and pressure nominal PN 25/40 resp. PN 100 available

Modelo y especificación

There are two designs available:

Sampling and air bleed valve, standard design

Sampling and air bleed valve with elbow

ZE/WU - 1

Special designs for higher pressures are available

ZE/WU - 2

Sampling and air bleed valve, standard design

Sampling and air bleed valve with elbow

ZE/WU - 1

Special designs for higher pressures are available

ZE/WU - 2

Optionally available with fl ange connection (see fi gure)

ZE/WU
* position of drilling holes on flange connection as well as thickness upon request for size DN 15 / ½", DN 20 / ¾", DN 25 / 1", DN 32 / 1¼", DN 40 / 1½" and pressure nominal PN 25/40 resp. PN 100 available
ZE/WU
* position of drilling holes on flange connection as well as thickness upon request for size DN 15 / ½", DN 20 / ¾", DN 25 / 1", DN 32 / 1¼", DN 40 / 1½" and pressure nominal PN 25/40 resp. PN 100 available
ZE/WU
* position of drilling holes on flange connection as well as thickness upon request for size DN 15 / ½", DN 20 / ¾", DN 25 / 1", DN 32 / 1¼", DN 40 / 1½" and pressure nominal PN 25/40 resp. PN 100 available