Skip to main content
 logo

Búsqueda

136 resultados:
91. FA-CN-IIC
FA-CN-IIC

The PROTEGO® FA-CN in-line deflagration flame arrester is a compact design utilizing an easy access cover for easy maintenance. The special PROTEGO® FA-CN-IIC version was developed for hydrogen...

92. EH/0
EH/0

The PROTEGO® E/H0 vent cap allows vessels which are not pressurized to vent. This device prevents rain and dirt from entering the vent line. The EH/0 vent cap is not flame transmission proof. It is often u...

93. VP/HK with PS/E & PG/H
VP/HK with PS/E & PG/H

The PROTEGO® gauging and sampling assembly consists of the manual gauging and sampling device PROTEGO® VP/HK (1), the gauging nozzle PROTEGO® PS/E (2), the gauging pipe PROTEGO...

94. SI/DP
SI/DP

PROTEGO® SI/DP in-tank valves are used as additional internal shut-off valve for double-walled containers, e.g., for storing liquefied gases, cryogenic gases, or other low temperature products or chemicals...

95. NB/AP
NB/AP

PROTEGO® NB/AP in-tank valves are used in storage tanks for cryogenic liquids in order to seal off discharge lines in the event of an accident or emergency (pipe bursting). These devices meet the requireme...

96. FA-E
FA-E

La serie PROTEGO® FA-E de apagallamas en línea a prueba de deflagraciones está diseñada con un cuerpo excéntrico para drenar automáticamente los condensados que se acumulan en el cuerpo. Debido a su d...

97. DR/ES-PTFE
DR/ES-PTFE

The PROTEGO® DR/ES-PTFE series in-line detonation flame arrester is distinguished by its unique resistance to adhesive and corrosive media. The use of fluoroplastics as a high-tech housing coating and as ...

98. BE/HK-E
BE/HK-E

The PROTEGO® BE/HK-E end-of-line deflagration flame arrester was specifically developed for vessels which are not pressurized and store ethanol or other alcohols. The combustion of alcohol requires a modified flame a...

99. DV/ZU
DV/ZU

The PROTEGO® in-line valve DV/ZU is a state-of-the-art pressure and vacuum relief valve with separate flange connections for pressure and vacuum breathing. Typically, the valve is installed in the in-breat...

100. FA-I-FC
FA-I-FC

The PROTEGO® FA-I-FC flame arrester units are components installed on or within equipment (e.g. blowers) and have to be tested and approved with this equipment for the respective operating conditions of us...

Search results 91 until 100 of 136