Skip to main content
 logo

Búsqueda

141 resultados:
101. DR/ES-PTFE
DR/ES-PTFE

The PROTEGO® DR/ES-PTFE series in-line detonation flame arrester is distinguished by its unique resistance to adhesive and corrosive media. The use of fluoroplastics as a high-tech housing coating and as ...

102. BE/HK-E-IIB1
BE/HK-E-IIB1

The PROTEGO® BE/HK-E end-of-line deflagration flame arrester was specifically developed for vessels which are not pressurized and store ethanol or other alcohols. The combustion of alcohol requires a modified flame a...

103. DV/ZU
DV/ZU

The PROTEGO® in-line valve DV/ZU is a state-of-the-art pressure and vacuum relief valve with separate flange connections for pressure and vacuum breathing. Typically, the valve is installed in the in-breat...

104. FA-I-FC
FA-I-FC

The PROTEGO® FA-I-FC flame arrester units are components installed on or within equipment (e.g. blowers) and have to be tested and approved with this equipment for the respective operating conditions of us...

105. FSU by Universal
FSU by Universal

Universal Floating Suction Units FSU are designed to ensure that product in a storage tank is drawn off just below the surface of the liquid where it is cleanest, preventing the suction point being at the bottom of th...

106. EB
EB

The PROTEGO® EB end-of-line deflagration flame arrester provides protection against atmospheric deflagration and long-lasting stabilized flames, called endurance burning. The device is typically installed ...

107. SD/BS-H
SD/BS-H

The SD/BS-H type PROTEGO® valve is a highly developed pressure relief valve with a heating jacket down to the flange. It is primarily used as pressure relief device for vessels and process engineering equi...

108. FA-I-V, FA-I-P
FA-I-V, FA-I-P

PROTEGO® FA-I-V and FA-I-P flame arresters are specifically designed for vacuum pumps, blowers, and compressors. The high flow velocity in the small gaps of these machines can lead to undesirable ignitions...

109. DV/ZU-F
DV/ZU-F

The PROTEGO® in-line valve DV/ZU is a state-of-the-art pressure and vacuum relief valve with separate flange connections for pressure and vacuum breathing. Typically, the valve is installed in the in-breat...

110. BE/HR-400
BE/HR-400

The PROTEGO® BE/HR-400 end-of-line deflagration flame arrester is designed to protect large vessels and process engineering apparatus which are not pressurized. The device provides protection against flame...

Search results 101 until 110 of 141