Skip to main content
 logo

Búsqueda

177 resultados:
91. DZ/E
DZ/E

The PROTEGO® in-line valve DZ/E is a state-of-the-art pressure or vacuum relief valve with a right angle design. Typically, the valve is installed in the in-breathing or out-breathing lines of tanks, vesse...

92. DA-UB
DA-UB

The type PROTEGO® DA-UB in-line detonation flame arresters are the newest generation of flame arresters. Based on fluid dynamic and explosion-dynamic calculations, as well as decades of field tests, a line...

93. VD/SV
VD/SV

El tipo de válvula PROTEGO® VD/SV es una válvula de alivio de presión/vacío altamente desarrollada indicada para caudales muy altos. Normalmente esta válvula se instala en las líneas de inhalación y...

94. BE/HK-E-IIB
BE/HK-E-IIB
The PROTEGO® BE/HK-E end-of-line deflagration flame arrester was specifically developed for vessels which are not pressurized and store Ethanol or other alcohols. The combustion of alcohol requires a modified...
95. ZE/TK
ZE/TK

The PROTEGO® ZE/TK condensate drain valve is used for flame transmission-proof condensate drainage of devices or plant equipment (e.g., tanks, pipelines, etc.) where flammable liquids can form condensate a...

96. DR/EU
DR/EU

The PROTEGO® DR/EU series of in-line detonation flame arresters represents further development of PROTEGO® flame arrester series DR/ES, which has been successfully used in industry for decades....

97. DZ/E-F
DZ/E-F

The PROTEGO® in-line valve DZ/E-F is a state-of-the-art pressure or vacuum relief valve in a right angle design for higher system pressures. Typically, the valve is installed in the in-breathing or out-bre...

98. P/EBR-E-IIB1
P/EBR-E-IIB1

The deflagration-proof and endurance burning-proof P/EBR-E type PROTEGO® valve is a highly developed pressure relief valve for large flows with an integrated flame arrester unit that is specifically design...

99. R/KSM
R/KSM

The PROTEGO® in-line valve R/KSM is a state-of-the-art pressure or vacuum relief valve in a right angle design made out of high-grade synthetic material. Typically, the valve is installed in the in-breathi...

100. EH/0S
EH/0S

The PROTEGO® EH/0S vent cap allows vessels which are not pressurized to vent. This device prevents rain and dirt entering the vent line. The PROTEGO® EH/0S vent cap is not flame transmission pr...

Search results 91 until 100 of 177