Skip to main content
 logo

Búsqueda

Search words under length of 3 characters are not processed.
179 resultados:
91. SA/S
SA/S

PROTEGO® Floating Suction Units, FSU, are used in storage tanks with very high purity requirements of the substances, e.g., aviation or fossil fuels. They are designed to ensure that product in a storage t...

92. BE/HR-D
BE/HR-D

The deflagration-proof and endurance burning-proof BE/HR-D type PROTEGO® valve is a highly developed pressure relief valve with an integrated flame arrester unit. It is primarily used as a device for flame...

93. DZ/E
DZ/E

The PROTEGO® in-line valve DZ/E is a state-of-the-art pressure or vacuum relief valve with a right angle design. Typically, the valve is installed in the in-breathing or out-breathing lines of tanks, vesse...

94. DA-UB
DA-UB

The type PROTEGO® DA-UB in-line detonation flame arresters are the newest generation of flame arresters. Based on fluid dynamic and explosion-dynamic calculations, as well as decades of field tests, a line...

95. VD/SV
VD/SV

El tipo de válvula PROTEGO® VD/SV es una válvula de alivio de presión/vacío altamente desarrollada indicada para caudales muy altos. Normalmente esta válvula se instala en las líneas de inhalación y...

96. BE/HK-E-IIB
BE/HK-E-IIB
The PROTEGO® BE/HK-E end-of-line deflagration flame arrester was specifically developed for vessels which are not pressurized and store Ethanol or other alcohols. The combustion of alcohol requires a modified...
97. ZE/TK
ZE/TK

The PROTEGO® ZE/TK condensate drain valve is used for flame transmission-proof condensate drainage of devices or plant equipment (e.g., tanks, pipelines, etc.) where flammable liquids can form condensate a...

98. DR/EU
DR/EU

The PROTEGO® DR/EU series of in-line detonation flame arresters represents further development of PROTEGO® flame arrester series DR/ES, which has been successfully used in industry for decades....

99. DZ/E-F
DZ/E-F

The PROTEGO® in-line valve DZ/E-F is a state-of-the-art pressure or vacuum relief valve in a right angle design for higher system pressures. Typically, the valve is installed in the in-breathing or out-bre...

100. P/EBR-E-IIB1
P/EBR-E-IIB1

The deflagration-proof and endurance burning-proof P/EBR-E type PROTEGO® valve is a highly developed pressure relief valve for large flows with an integrated flame arrester unit that is specifically design...

Search results 91 until 100 of 179