The PROTEGO® In-Tank Valves NB/AP and ITV-S for tank bottom or tank wall connection are used in cryogenic tanks and fulfills the requirements of API 625. The valves can be put to service in applications where temperatures as low as –196°C exist.
The isolation valve is physically located inside the tank on the vessel bottom or on a connection to the tank shell and while the tank is in normal service, it is kept in open position. In the
event of a failure of the external piping of the discharge line the In-Tank valve is automatically activated. It is also automatically activated during a loss of power or air supply.
- Fulfi ll the requirements of API 625
- The valves closes automatically in an emergency case
- Complete discharge of the tank is prevented
The PROTEGO® In-Tank valve SI/DP for tank wall connection is used in cryogenic tanks which serve to store liquefied gases. The valve can be put to service in applications where temperatures as low as –196°C exist.
The isolation valve disc is physically located inside of the tank. While the tank is in normal service, the valve is kept in open position and it is shut only in the event of a failure of the external piping of the discharge line. The internal safety valve is opened and shut through a singleacting actuator. In the unlikely event - an incident - might occur, the control system is designed such that the valve will automatically seal tight. Also, provision is made such that an ancillary component can be fitted to permit manual actuation of the valve.