PROTEGO® Newsletter

NEW: PROTEGO® PM-HF

The PROTEGO® PM-HF pilot-controlled pressure and vacuum relief valve is an advanced development of the tried and tested PM/F model. The PM-HF now allows pressure settings of up to 15 psi - 1,034 mbar to be made. Its persuasive design features an improved flow efficiency and extreme seal-tight capability. The valve is now available in a soft-seating configuration. Minimized product losses and, hence, reduced environmental impact are guaranteed. The valve can be put to service in applications where temperatures as low as -196°C prevail.
The PROTEGO® PM-HF has furnished proof of its excellent performance in extensive endurance tests conducted under overload and in tough climatic conditions.

more 

PROTEGO® Catalog 2014/2015 is in!

The new PROTEGO® Catalog is available!

Order now

PROTEGO® Product Information

PROTEGO® UB/SF-IIB3 - The unique deflagration-, endurance burning- and frost-proof pressure/vacuum relief valve

  • protection against atmospheric deflagrations and endurance burning
  • freeze protection at sub-zero conditions
  • particularly suitable for problematic products such as monomers,polymerizing media and vapours with a tendency to condensate, etc. 

more

Changes in Academy & Services

Since 2009, Dr Victor Halstrick has developed the PROTEGO® Academy, expanding its activities to become a successful integral part of our services portfolio. In over 50 training courses organized in Braunschweig, almost 700 interested customers/partners have since attended instructions under the scheme. In another 160 instruction courses organized at customers' on site, more than 2,000 participants were coached to learn more about our products and how to handle them.

Dr Halstrick will go into retirement at the end of June 2014. At this time we are grateful to Dr Victor Halstrick for the activities he has pursued in relation to the Academy.

Thomas Anderssohn is currently being entrusted with the activities, and will continue the Academy's work on his own from the second half of 2014. Tino Haas, once adequately familiarized and trained as well as officially introduced, will look after the service activities pursued by Mr Anderssohn to date (on site by PROTEGO® service technicians).

We trust that work with our customers and partners will continue to be hand in glove.


Thomas Anderssohn

Tino Haas

PROTEGO® Academy

After Sales Service

+49 (0) 5307 / 809-144

+49 (0) 5307 / 809-292
thomas.anderssohn@protego.detino.haas@protego.de

 

 

PROTEGO USA implements ISO 9001 quality management system

PROTEGO USA, a PROTEGO® subsidiary based in Charleston, SC, has successfully implemented a quality management system in compliance with the requirements of ISO 9001:2008.

Over the last year, the company worked tirelessly to establish and refine the required procedures, systems, and controls before submitting to rigorous auditing. Based on the audit results, PROTEGO USA was recommended for certification, and was officially awarded ISO 9001 certification on March 6, 2014.

Considerable effort by all PROTEGO USA staff was essential in realizing this goal. Going forward, PROTEGO USA plans to continuously improve its quality management system and expand it by pursuing ATEX certification.

10th Anniversary PROTEGO Spain

PROTEGO Spain was officially established as a company in February 2004, but its first activities started on June 1, 2004 continuing the work of eight years which Fike Ibérica had started as a PROTEGO® distributor.

In these ten years of activity we have strengthened and consolidated our presence in the Spanish market. Nowadays PROTEGO® is a highly regarded reference in Spain in the process engineering, chemical, pharmaceutical and petrochemical industries as well as in the biogas sector too. Our clients trust our technical advice, our quality standards and the high performance of our products and services.

We have moved forward progressively and are proud of our achievements, but we know it is just the beginning and see the future with enthusiasm and commitment.

We herewith wish to express our gratitude for the big support offered by our headquarter in Germany and extend our thanks to everyone who has contributed to our ten years of success.

Visit us at ILTA 2014, Houston, TX, June 2-4, Stand 226

With our motto “Excellence in Safety and Environment” we will proudly display our innovative products from our following ranges: flame arresters, valves, tank accessories as well as PROTEGO® Service and Maintenance.

Do not hesitate to contact us at marketing@protego.de if you have any questions.

We will be pleased to meet you at Stand 226!

ILTA website

Contact us

Braunschweiger Flammenfilter GmbH
Industriestr. 11
D-38110 Braunschweig
phone: +49 (0) 5307 / 809-0
fax: +49 (0) 5307 / 7824
e-mail: marketing@protego.de 

Contact